After years of producing for other brands, we have decided to offer Eggstasy under our own label, renewing the color range with new and effective shades. The replicability of each color is guaranteed by our dyeing system, which, in addition to offering high precision, has an extremely low environmental impact.
Eggstasy is an excellent material for creating egg imitations, but it is also suitable for other applications to attact various types of fish. Unlike traditional materials used for these imitations, which require loop techniques or complicated tying steps, Eggstasy significantly simplifies the process, even on small hooks.
The thin, translucent, and textured fibers retain water, giving the imitation a very realistic appearance. These fibers also have good movement during fishing action, adding further vitality to the fly.
Eggstasy is suitable for many other types of flies, both for saltwater and freshwater. Thanks to the thermofusible bonding core, which perfectly retains the fibers while being very thin, it is also possible to create imitations of large worms or body extensions.

– 2-meter package
– 12 mm. fibers

Building on Danville’s renowned classic thread and combining our over 60 years of experience in textile fibers and dyeing, we have reintroduced Flat Waxed Nylon, preserving its distinctive characteristics while expanding its color range.
Flat Waxed Nylon is a high-tenacity tying thread composed of nearly parallel filaments, making it lie very flat on the hook, provided that the twists formed during wrapping are released. Thanks to this feature, it allows for the creation of very uniform bodies.
It is perfect for tying large flies, both for saltwater and freshwater, and is also excellent for tying large flies using natural materials, allowing you to tightly tie hair and hackles without cutting them.

– 100-meter spool
– 210 Denier thread size

Building on Danville’s renowned classic thread and combining our over 60 years of experience in textile fibers and dyeing, we have reintroduced Flymaster Plus, preserving its distinctive characteristics while expanding its color range.
Flymaster Plus is a tying thread specifically designed for creating medium to large-sized flies, such as streamers and poppers for various predator fish.
It is made with high-tenacity twisted filaments to ensure additional strength during the tying process.

– 100-meter spool
– 210 Denier thread size

Medium-sized braid made from overdyed rainbow mylar, suggested for tying both full bodies and partial ribbing.
It can also be unraveled, extracting the fibers composing the braid to obtain a flat Mylar for making wings or tails of small flies.
To achieve interesting color variations, it can be wrapped over other base threads, producing multiple shades of color.
Also available in a spooled version.

– 3 meter card
– Size 4

Next-generation chenille, crafted with high-absorption microfibers and a thermofusible core that enhances strength without compromising its remarkable mobility.
This combination allows for exceptional mobility in water, despite its mere 1-millimeter diameter. Primarily designed to mimic extremely small worms for tying on hooks up to #16-18, it lends itself particularly well to being wrapped around the hook for forming bodies, such as pupae, or for creating a hot spot, as in the case of imitating stonefly and caddisfly larvae.
It is available in both natural colors for a realistic imitation and vibrant fluorescent colors for increased visibility, even in murky water conditions.

– 2 meter card
– 1 mm. fibers

20mm Palmer Chenille made with ultraviolet fibers blended with thin, translucent, highly mobile fibers. Thanks to its very thin core, it’s perfect for preventing bulk when tying bodies. It’s ideal for palmer-style flies, and can also be twisted by hand to tie streamer bodies.
It’s recommended for medium to small streamers where fiber mobility is essential.
Available in 15 colors, both natural and fluorescent.

– 2 meter card
– 20 mm. fibers

New 5 mm. Straggle, made with ultra-fine metallic fibers mixed with very thin support fibers to enhance its movement in the water.
The core doesn’t add bulk to the body of the fly, and when combined with the sparsely distributed effect fibers, it allows for use even on very small hooks.
Ideal for nymphs and wet patterns, as well as small streamers.
It can be used in combination with a wide range of natural and synthetic materials to increase its movement in the water and realism.

– 3 meter card
– 5 mm. fibers

New 5 mm. Straggle, made with ultra-fine metallic fibers mixed with very thin support fibers to enhance its movement in the water.
The core doesn’t add bulk to the body of the fly, and when combined with the sparsely distributed effect fibers, it allows for use even on very small hooks.
Ideal for nymphs and wet patterns, as well as small streamers.
It can be used in combination with a wide range of natural and synthetic materials to increase its movement in the water and realism.

– 3 meter card
– 5 mm. fibers

CLAMP AND BASE TO FACILITATE THE MIXING OF DIFFERENT MATERIALS FOR USE IN DUBBING LOOPS
"With this tool, I wanted to give all fly tyers, from the most to the least experienced, the possibility to easily mix materials of all kinds (hairs, feathers, and synthetics), and then insert them into a loop to form a cord. Free hands and a stable support surface make this operation even easier and more precise. And now… enjoy!
Luca Barosselli"

INSTRUCTIONS FOR USE:
– Fully open the BlendMaster Clamp on a flat surface with the faces without prints facing upwards
– Arrange the chosen materials for your dubbing loop in the desired quantity and order, between the two full faces of the clamp
– Gently close the clamp by tipping the face with the inspection window toward the materials, resting it on top of them.
– Adjust the quantity and length of the materials by pulling them through the window, or by reopening the clamp
– Grip the base of the clap with one hand, lifting it off the table, and flip the last face underneath to form a closed unit
– With an appropriate plier, clamp the obtained material mix and pull it out to insert it in the dubbing loop
– Designed by Luca Barosselli
– 100% Made in Italy
– The orange color ensures optimal contrast even on natural-colored fibers
– Always store the BlendMaster Clamp closed with the printed side up
– If the hinges become stiff, lightly lubricate the hinge pivot points
– Keep away from heat sources
– Clamp sizes (fully extended): L16 x W8 cm
– Packaging sizes: L180 x W70 x H13 cm

The Tool Caddy is the new tabletop fly tying accessory, entirely produced in our 3D Printing department.
It consists of a rotating base with four compartments, all equipped with special removable bridges, allowing you to store Uv glues upside down. It can hold from 3 up to 12 Uv adhesives or various other ly tying materials and accessories. The two rotating heads with holes of various sizes can be positioned at the desired height, thanks to the sectioned spacers. You can configure it with both heads mounted or just one at the top,for those who need to insert long tools that would interfere with the underlying head. It also comes with 10 hooks to insert into the external holes of the heads for hanging tools of particular shapes, such as hackle pliers, or simply keeping the most frequently used ones within easy reach.

– Designed in collaboration with Paolo Ceccon
– 100% Made in Italy
– Rotating base with four compartments and removable bridges for UV adhesives
– Rotating heads with holes ranging from 3 to 8 mm
– 10 hooks for hanging additional accessories
– Available in Black
– Total height 25 cm.
– Assembly instructions inside the package or scan the QR Code for the video
– Internal core made of threaded steel bar
– Made from renewable plant-based plastics

Synthetic fibers, thin and durable, printed with a barred effect, a good choice for nymph and dry fly tails.

Made with sparse pure wool fibres mixed with a transparent film. Perfect for small natural- looking imitations.

– 3 meters cardboard.

Pure wool fibre blended with rainbow angelina fibres. Continuous carded for easy use, with the possibility of easily tying small streamer bodies by extracting the fibres. Excellent dubbing material can be obtained by cutting it with scissors to the desired length.

An extremely dense chenille made with a blend of translucent and ultraviolet fibres, which are perfectly anchored thanks to the use of special technological materials, thus preventing them from being lost during use. Although primarily designed for Blobs, is also suitable for streamer bodies.

– 3 meters cardboard.

An extremely dense chenille made with a blend of translucent and rainbow fibres, which are perfectly anchored thanks to the use of special technological materials, thus preventing them from being lost during use. Although primarily designed for Blobs, is also suitable for streamer bodies.

– 3 meters cardboard.

Manufactured with the same features as the Super Long Hair, it has some ultraviolet fibes mixed in it. Extremely voluminous and lightweight, it behaves in a manner quite similar to Marabou when in the water.

– 3 meters cardboard.

An extremely dense chenille made with a blend of translucent fibres, which are perfectly anchored thanks to the use of special technological materials, thus preventing them from being lost during use. Although primarily designed for Blobs, is also suitable for streamer bodies.

– 3 meters cardboard.

An extremely dense chenille made with a blend of translucent fibres, which are perfectly anchored thanks to the use of special technological materials, thus preventing them from being lost during use. Although primarily designed for Blobs, is also suitable for streamer bodies.

– 3 meters cardboard.

A highly- elastic round fibre that can be manually stretched in order to reduce its diameter by as much as four times. While mainly used for the creation of legs and antennae, it is also an excellent material for ribbing. Particularly adherent dye that prevents the colour from being released during use.

Rainbow fibres sewn on one side, suitable for tying medium streamers. Its particular design renders it easy to use.

– 1 meter bag

Rainbow fibres sewn on one side, suitable for tying large streamers. Its particular design renders it easy to use.

– 1 meter bag

Classic braided Mylar which can be used for tying streamer bodies by extracting the interior core.

Classic braided Mylar which can be used for tying streamer bodies by extracting the interior core.

Classic braided Mylar which can be used for tying streamer bodies by extracting the interior core.

Fine braided Mylar, ideal for ribbing on bodies.

A variant of the classic Cactus Chenille, but made with a special blend of metallic fibres that provide for special lighting effects, quite similar to holographic effects.

– 3 meters cardboard.