Mosquito Shield Coils – Fight The Bite™ Kills & Repels, Exclusive Black Premium coils, Long Lasting 5.5 hrs per coil, Environment Clean Burn, Strongest Formulation – create an invisible MOSQUITO SHIELD to prevent & protect against mosquitoes bites, while enjoying the outdoors.

BUCKSKIN / OPTIC GREEN

The Absolute Indicator Stillwater Leader has a short hot-orange colored butt section for strike detection and an extended length tippet section so flies sink efficiently with minimal added weight. Designed for stillwater trout, it can also be used on moving water. Available in a 12’ length in 2x-4x.

Absolute leaders are made with proprietary copolymer blends that are designed to drastically reduce water absorption while maintaining an optimal suppleness for high knot strength. Absolute nylon leaders and tippet have a 29% higher wet knot strength compared to our previous material and up to 40% higher wet knot strength when compared to our competitors. Our new paper-based leader packaging is now 100% recyclable. All materials, inks, and window are fully biodegradable to protect our streams and reduce our environmental footprint. Please don’t litter.

Hot orange butt section for strike detection
Great for indicator fishing stillwater or rivers for trout
Short Butt section with long tippet section to sink nymphs quickly and evenly
Lengths- 12′ 2-4X
Fishing Type: Indicators, Nymphs,

Quantity per Pack : 2 - 7.5' Tapered leader aids in smooth turnover of larger flies.
- Abrasion-resistant leader material holds up to harsh conditions.
- 15'' section of tooth-resistant 1x7 Stainless Steel wire
- Black nylon coated for low visibility
- Heavy-duty black single-barrel sleeves for secure attachment of flies

MULTI FUNCTION FISHING CLAMP

Half Smooth Half Serrated Jaw
5.75” Length
Ergonomic Foam Grip
Stainless Steel Construction
Needle Hook Eye Cleaner
Item #140256

Open and close with a single motion
Half Smooth Half Serrated Jaw with Built-in Scissor
5.5” Length
Ergonomic Foam Grip
Stainless Steel Construction
Needle Hook Eye Cleaner
Item #140270

The Tool Caddy is the new tabletop fly tying accessory, entirely produced in our 3D Printing department.
It consists of a rotating base with four compartments, all equipped with special removable bridges, allowing you to store Uv glues upside down. It can hold from 3 up to 12 Uv adhesives or various other ly tying materials and accessories. The two rotating heads with holes of various sizes can be positioned at the desired height, thanks to the sectioned spacers. You can configure it with both heads mounted or just one at the top,for those who need to insert long tools that would interfere with the underlying head. It also comes with 10 hooks to insert into the external holes of the heads for hanging tools of particular shapes, such as hackle pliers, or simply keeping the most frequently used ones within easy reach.

– Designed in collaboration with Paolo Ceccon
– 100% Made in Italy
– Rotating base with four compartments and removable bridges for UV adhesives
– Rotating heads with holes ranging from 3 to 8 mm
– 10 hooks for hanging additional accessories
– Available in Black
– Total height 25 cm.
– Assembly instructions inside the package or scan the QR Code for the video
– Internal core made of threaded steel bar
– Made from renewable plant-based plastics

CLAMP AND BASE TO FACILITATE THE MIXING OF DIFFERENT MATERIALS FOR USE IN DUBBING LOOPS
"With this tool, I wanted to give all fly tyers, from the most to the least experienced, the possibility to easily mix materials of all kinds (hairs, feathers, and synthetics), and then insert them into a loop to form a cord. Free hands and a stable support surface make this operation even easier and more precise. And now… enjoy!
Luca Barosselli"

INSTRUCTIONS FOR USE:
– Fully open the BlendMaster Clamp on a flat surface with the faces without prints facing upwards
– Arrange the chosen materials for your dubbing loop in the desired quantity and order, between the two full faces of the clamp
– Gently close the clamp by tipping the face with the inspection window toward the materials, resting it on top of them.
– Adjust the quantity and length of the materials by pulling them through the window, or by reopening the clamp
– Grip the base of the clap with one hand, lifting it off the table, and flip the last face underneath to form a closed unit
– With an appropriate plier, clamp the obtained material mix and pull it out to insert it in the dubbing loop
– Designed by Luca Barosselli
– 100% Made in Italy
– The orange color ensures optimal contrast even on natural-colored fibers
– Always store the BlendMaster Clamp closed with the printed side up
– If the hinges become stiff, lightly lubricate the hinge pivot points
– Keep away from heat sources
– Clamp sizes (fully extended): L16 x W8 cm
– Packaging sizes: L180 x W70 x H13 cm

ON STREAM ORGANIZATION
Keep your tippet spools organized and ready to go at a moments notice. The Switch holders unique design lets you choose either a horizontal or vertical orientation on your sling pack, vest or boat bag. Powder coated aluminum construction.

Fine Tip For Removing Small Flies
Features XL Loops For Gloved Fingers
6” Length
Ergonomic Foam Grip
Stainless Steel Construction
Needle Hook Eye Cleaner
Item No. 142427

Tailout XL Scissor Clamp gives ample room for gloved fingers to open when unhooking your catch.

Half Smooth Half Serrated Jaw
Features XL Loops For Gloved Fingers
6.75” Length
Ergonomic Foam Grip
Stainless Steel Construction
Needle Hook Eye Cleaner
Item No. 142434

Stainless steel cutting blades
Wide, coated grip with finger choil for positive, reliable grip
Enclosed needle for clearing hook eyes without poking fingers
3” Length
Item #140652

EASY LEADER TO TIPPET CONNECTION
Tippet rings create a strong connection between your leader and tippet, that don’t require you to cut back your leader every time you need to add additional tippet.

Stainless steel rings for rigging leader and tippet
Available in 2 sizes: Small (2mm, 17lb test) and Medium (2.5mm, 26lb test)
Black Nickel finish
10 to a package

The Amplitude Smooth Infinity lines are, simply put, the highest-performance smooth fly lines in the world. With up to five times less drag and eight times the durability of traditional lines, this will change the way you look at fly line performance.

The conventional wisdom in fly fishing is that there’s no such thing as a “do it all” freshwater line. We have something to say about that. The Amplitude Smooth Infinity has the power to bomb out streamers, yet retains delicacy for dry flies. It mends like an absolute dream, and delivers flies at all distances. Built a half-size heavy, with a long head and substantial front taper, it’s perfect for everything from trout and panfish to pike and steelhead. There’s a reason we call it the Infinity: there is no end to what you’ll be able to do with it.

Features the revolutionary AST Plus slickness additive for superior shooting ability and increased durability
Extremely versatile general-purpose taper designed for most freshwater species; an excellent fly line for trout, grayling, panfish, bass, carp, steelhead, salmon, and pike
Made a half-size heavy to load fast-action rods, but works well with a variety of rod actions
Extended head length for long-distance casts and superior mending ability
Excellent for dry flies, nymphs, and streamers
For use in moderate and cold climates
Braided multifilament core

L3AS Bronze / Straight-Eye

Design based on the ‘Captain Hamilton’ bend with a slightly shortened shank. Perfect pattern for Spiders and Soft Hackle flies.

Le masque de lièvre est un matériel de montage essentiel pour les nymphes de truites.